Drying oven incubator LB-15DOI is a dual functioning oven-incubator with a rapid heating and working temperature of 5 °C to 80 °C for incubator and 80 °C to 300 °C for the oven. Built-in silicate insulated layer prevents heat loss. The control system combines the two temperature ranges in one unit through a simple high/low switch. Forced air convection provides optimal air circulation, temperature uniformity, and brief heat-up time.
| Chamber volume | 230 L |
| Number of shelves | 17 |
| Inner chamber size ( W x L x H ) | 600 x 500 x 750 mm |
| Temperature range | Incubator : RT +5 °C to 80 °C Drying oven : 80 °C to 300 °C |
| Cycle mode | Forced convection |
| Temperature resolution ratio | 0.1 °C |
| Temperature motion | ± 1 °C |
| Temperature uniformity | Incubator : ± 1 °C Drying oven : ± 2.5 % |
| Inner chamber | Mirror stainless steel |
| Outer shell | Cold rolled steel electrostatic spraying chamber |
| Insulation layer | Silicate heat preservation board |
| Heater | Stainless steel heater |
| Exhaust hole | ᴓ 28 mm top ( with test hole function ) |
| Display mode | LED |
| Timer | 0 ~ 9999 min ( time wait function ) |
| Operational function | Fixed temperature operation , timing function , auto stop |
| Sensor | Pt100 |
| Load per rack | 15 kgs |
| Shelf space | 35 mm |
| Power | 3.0 kW |
| Power supply | AC 220 V / 13.6 A |
| Exterior dimensions ( W x L x H ) | 730 x 680 x 1250 mm |
| Weight | 94 kgs |
| Accessory No | Accessory | Quantity |
| 1. | Shelf | 2 |
| 2. | Shelf frame | 4 |
| Accessory No | Accessory |
| 1. | RS485 interface |
| 2. | Printer |
| 3. | Remote control |
| 4. | Wireless SMS alarm |
| 5. | USB data storage |
Used for drying, sterilizing and incubating samples in the laboratory, industrial and general purpose environment
Address: Labotronics Scientific. 1007 N Orange St.,
Wilmington, DE 19801, USA
Mail: info@labotronics.com
WhatsApp: +1 579 401 0534
All Sections
Best Seller
Quick Links
Copyright © Labotronics Scientific 2026