Methane Detector LB-10MET Catalog

Methane Detector LB-10MET measures methane from 0 to 10,000 ppm and automatically adjusts to LEL and % VOL based on the detected concentration. It includes a powerful sampling pump for fast analysis, with a response time of ≤ 30 seconds. Our detector features a flexible probe for detecting methane leaks in underground locations. It is equipped with an LCD screen that rotates 180° and provides an adjustable backlight for improved visibility.

Gas Detected	CH4
Detection Principle	Semiconductor/IR
Measuring Range	0 to 10000 ppm 0 to 100% LEL 0 to 100% VOL
Resolution	1 ppm 1% LEL 0.01% VOL
Response Time	≤ 30 seconds
Precision	≤ ± 1 to 5 % F.S except for special gases
Working Temperature Range	- 20℃ to 50℃
Humidity	10 to 90 % RH (no condensation）
Working Pressure	86 to 106 Kpa
Automatically Test and Calibrate After Power-On	Including reset, maximum value (MAX), minimum value (MIN), STEL, TWA value
Unit	PPM, mg/m3, %LEL, %VOL
Display	LCD (160 × 96) ,180° rotate
Data Record	100,000 readings
Alarm	95dB at 30cm buzzer alarm, flashing red LED alarm, and vibration alarm
Explosion-Proof	IECEx: Ex ia IIC T4 Ga ATEX : II 1G Ex ia IIC T4 Ga
Certification (EU Regulations)	2004/34/UE (ATEX）
Protection Grade	IP67
Working Hours	More than 15 hours in continuous pumping mode
Charger	Travel charger with DC interface, charging time ≥ 4 hours
Battery	3.7V rechargeable lithium battery,
Battery Capacity	2200mA
Dimensions (L × W × H)	157 × 84.5 × 59.5 mm
Weight	365g

• Flexible probe for underground leaks
• Low power consumption
• Large lithium polymer battery
• Datalogger with USB download
• Durable IP67 polycarbonate case
• Automatic voltage and pump failure alarms

Gas detector 12V/1A DC power adapter USB cable Flexible probe Aluminum suitcase

Methane Detector is used for quick and accurate detection of methane in industrial safety, environmental monitoring, and underground leak assessment.