Automatic Cleveland Open Cup Flash Point Tester LB-20CFP

Our foaming characteristic tester is a specialized instrument used in the petroleum industry to evaluate the foaming properties of lubricating oils. It measures the foaming tendency and stability of the oil under controlled conditions, simulating the dynamic conditions within engines. The tester typically involves agitating the oil sample to induce foam formation, and the resulting foam height and stability are observed. Foaming Characteristic Testers are essential for quality control and research and development, helping to ensure that lubricating oils meet industry standards and specifications, ultimately contributing to the reliability and longevity of machinery and engines.

Foaming characteristic tester LB-12FCT

Ask Quotation

Temperature control point	150 °C ± 0.5 °C
Bath stir	Motor stirring
Accuracy
Agitation mode

Foaming Characteristic Tester LB-10FCT

Ask Quotation

Temperature control point
Bath stir
Accuracy
Agitation mode

Foaming characteristic tester LB-11FCT

Ask Quotation

Temperature control point	24 °C 93.5 °C
Bath stir
Accuracy	± 0.5 °C
Agitation mode	Electrical

Our petroleum density tester is a specialized instrument used in the petroleum industry to measure the density of liquid fuels and other hydrocarbon-based products. This crucial parameter is indicative of the mass per unit volume and is essential for quality control and compliance with industry standards. The tester typically employs the oscillating U-tube principle, where the sample is introduced into a vibrating U-tube filled with a reference liquid. The frequency of oscillation changes with the density of the sample, allowing for accurate density determination.

Petroleum Density Tester LB-11PDT

Ask Quotation

Measuring cylinder capacity	1000 mL
Bath temperature	20 °C ~ 95 °C
No of testing holes	2
Mixing method	Mixing motor 1200 r/min

Petroleum Density Tester LB-10PDT

Ask Quotation

Temperature Range	0 °C to 100 °C
Temperature Accuracy	± 0.1 °C
Temperature Sensor	PT100 platinum resistance
Thermometer Least Count	0.2 °C

Petroleum Density Tester LB-20PDT

Ask Quotation

Measuring cylinder capacity
Bath temperature
No of testing holes	2
Mixing method

Our Dropping Point Tester is a specialized laboratory instrument designed to determine the dropping point of lubricating greases. This crucial parameter signifies the temperature at which the grease undergoes a transition from a semi-solid to a liquid state. Operating on the principle of heating a sample and observing the point at which a standard cone penetrates the softened grease, the tester ensures precise measurement of dropping points. Widely used in industries like automotive and machinery, this tester provides essential information about the temperature range within which a grease can effectively lubricate moving parts.

Dropping Point Tester LB-11DRT

Ask Quotation

Temperature control range
Temperature control accuracy
Temperature control point
Glass bath capacity	800 mL

Dropping Point Tester LB-10DRT

Ask Quotation

Temperature Control Range	400℃
Temperature Control Point	121℃，232℃，288℃，343℃
Temperature control accuracy	± 3℃
Grease Cup Material	Chrome plated copper

High Temperature Dropping Point Tester LB-20DRT

Ask Quotation

Temperature control range
Temperature control accuracy
Temperature control point
Glass bath capacity

Octane and Cetane Tester is a specialized instrument used in the petroleum and automotive industries to determine the octane rating of gasoline and the cetane number of diesel fuels, respectively. It plays a crucial role in quailty control and research, ensuring that fuels meet specified standards for combustion performance. The tester typically operates by subjecting a fuel sample to controlled conditions in a test engine and analyzing its ignition characteristics. For gasoline, the octane rating indicates resistance to pre-ignition, while the cetane number in diesel fuel correlates with ignition delay. These parameters are vital for optimizing engine performance, preventing knocking or excessive emissions.

Octane and Cetane tester LB-10OCT

Ask Quotation

Type	Portable
Measuring Method	RON and MON
Octane Gasoline Measurement Range	40 to 125 ON
Octane Accuracy	± 0.5

Labotronics ash content tester is a laboratory instrument used to determine the inorganic residue content in a given sample, typically in materials like plastics, polymers, and organic compounds. It works by subjecting the sample to high temperatures, burning off the organic components, and leaving behind the inorganic ash residue. This test is essential for quality control and research and development in various industries, including pharmaceuticals, food, and materials manufacturing. Our ash content measurement provides insights into the purity and composition of materials, aiding in material selection, product development, and ensuring compliance with industry standards and regulations.

Ash Content Tester LB-10ACT

Ask Quotation

Temperature range	RT ~ 1000 °C
Air furnace heating time	≤ 60 min
Temperature uniformity	≤ 15 °C
Temperature control	775 °C ± 25 °C