COD Thermoreactor LB-12CTR

COD Thermoreactor LB-12CTR

COD thermoreactor LB-12CTR is a tabletop unit with an aluminum heating block for optimum thermal conditions and a high level of homogeneity. Electronic temperature control ensures temperature regulation from ambient to 200°C. Real time test monitoring aids in parameter check. Analysis time can be set from 1 to 199 minutes or continuous.

Buy Now Download Catalog

Specifications

Number of sample 20 (Ø 42 mm)
Dimensions 420 × 750 × 480 mm
Power 2000 W
Temperature 5 °C to 200 °C
Accuracy ± 0.5 °C
Resolution 1 °C
Power supply 230 V
Weight 20 kgs

Features

  • Short duration (30 minutes at 160 °C)
  • Operating time (30 min, 60 min, 90 minutes or continuous)
  • Simple and easy programming of time and temperature parameters
  • Automatic shutdown and buzzer at run end
  • Countdown time display visualization
  • Real time test monitoring through digital display
  • Safety demonstration by acoustic and visual signals

Applications

Used for performing routine water analysis tests with small sample amounts. Suitable for determinations of many parameters in water and sludges.

Our Team Of Experts Will Promptly Address Your Inquiry.

What our customers say

Jeadelyn . logo

6 months ago

peter tran logo

1 year ago

S. Kavidhas logo

3 years ago

Altaf Lodhi logo

3 years ago

RONNY MURITHI logo

1 month ago

Kamlesh Gaikar logo

1 year ago

Muhammad Ali logo

2 years ago

MIRZA AFZAL ALI logo

3 years ago

Ikram . logo

3 years ago

Sami Akhtar logo

3 years ago

Bageshri Keche logo

3 months ago

Maniram Pathak logo

1 year ago

Ilkin Gudratov logo

4 months ago

Anwar Alam logo

3 months ago

RAJNEESH BALUNI logo

3 years ago

Maryam . logo

11 months ago

Huda Mahmoud logo

11 months ago

Muhammad Anwar logo

7 months ago

Md. Samsuzzaman . logo

1 year ago

Add a review

COD Thermoreactor

COD Thermoreactor : COD Thermoreactor LB-10CTR
Number of sample 8 (Ø 42 mm)
Dimensions 350 × 750 × 370 mm
Power 1000 W
Temperature 5 °C to 200 °C
COD Thermoreactor : COD Thermoreactor LB-11CTR
Number of sample 12 (Ø 42 mm)
Dimensions 360 × 750 × 430 mm
Power 1500 W
Temperature 5 °C to 200 °C

Labotronics Benchtop Turbidity Meter is a laboratory instrument designed to measure the cloudiness or turbidity of a liquid sample. Typically used in environmental monitoring, water treatment plants, and research laboratories, these meters utilize optical sensors to quantify the amount of suspended particles or colloids in the liquid. The benchtop design ensures stability during measurements, and the meters often feature a digital display for convenient and accurate readings. Our benchtop turbidity meter is an essential tool for researchers and professionals working in fields where precise turbidity measurements are necessary for quality control and compliance with regulatory standards.

Measurement range 0 ~ 1000
Minimum value 0.1
Error ± 6 % ( ± 2 % F.S )
Repeatability ≤ 0.8 %
Measurement range 0 ~ 800
Minimum value 0.1
Error ± 6 % ( ± 2 % F.S )
Repeatability ≤ 0.8 %
Measurement range 0 ~ 400
Minimum value 0.01 0.1
Error ± 6 % ( ± 2 % F.S )
Repeatability ≤ 0.8 %
Measurement range 0 ~ 100 100 ~ 800
Minimum value 0.1
Error ± 6 % ( ± 2 % F.S )
Repeatability ≤ 0.8 %

Our Benchtop Conductivity Meter is a compact and precision instrument used for measuring the electrical conductivity of liquids. Typically designed for laboratory or industrial settings, it consists of a control unit and a conductivity cell. The meter assesses the ability of a solution to conduct an electric current, providing valuable information about the solution's ionic content and purity. Our benchtop models offer accuracy and ease of use, often featuring digital displays, adjustable settings, and the capacity to measure a wide range of conductivity levels. Widely utilized in chemistry, environmental science, and quality control applications, these meters play a crucial role in ensuring the consistency and reliability of solutions in diverse industries.

Measuring range Conductivity: 0.000 µS/cm to 2000 mS/cm Resistivity: 5.00 Ω.cm to 100.00 MΩ.cm TDS: 0.000 to 1000 ppt Salinity: 0.00 to 8.00% Temperature: -10 to 135°C; 14 to 275°F
Resolution Conductivity: 0.001 µS/cm Resistivity: 0.01 Ω.cm TDS: 0.001 ppm Salinity: 0.01% Temperature: 0.1°C/°F
Accuracy Conductivity: ±0.5% FS Resistivity: ±0.5% FS TDS: ±0.5% FS Salinity: ±0.01% Temperature: ±0.1°C/°F
Conductivity calibration points Up to 5
Measurement range 0.0 ~ 2 × 105 µs/cm
Temperature compensation 15 °C ~ 35 °C ( manual )
Resolution
Accuracy ( electrode ) ± 1 % FS
Measuring range Conductivity: 0.00 µS/cm to 200 mS/cm TDS: 0.00 mg/L to 100 g/L
Resolution Conductivity: 0.01 µS/cm TDS: 0.01 mg/L
Accuracy ±1.0% FS
Conductivity reference temperature 25°C
Measurement range 0.0 ~ 199.9 µs/cm 200 µs/cm ~ 1999 µs/cm 2.0 µs/cm ~ 19.99 ms/cm 20 µs/cm ~ 199.9 ms/cm
Temperature compensation 10 °C ~ 50 °C ( manual )
Resolution 0.1/1µs/cm 0.01/0.1ms/cm
Accuracy ( electrode ) ± 1 % FS

Labotronics Ratio Turbidimeter is an analytical instrument specifically designed for measuring the turbidity of liquid samples by employing a ratio turbidimetry technique. This method involves the measurement of scattered light at two different angles, typically 90 and 180 degrees, to enhance accuracy in turbidity readings. The instrument uses a dual detector system to minimize interferences and improve sensitivity, ensuring precise and reliable turbidity measurements. Our ratio turbidimeters are commonly employed in water treatment facilities, environmental monitoring, and industrial processes where accurate turbidity assessments are crucial for quality control and regulatory compliance.

Measurement range 0.005 ~ 50.0 NTU 1 ~ 200 NTU
Allowable error of indication ≤ ± 8 %
Receiving element Silicon photocell
Light source Tungsten halogen lamp 6 V, 10 W
Measurement range 0.005 ~ 50.0 NTU 1 ~ 200 NTU 201 ~2000 NTU
Allowable error of indication 0 ~ 200 NTU: ≤ ± 8 % 201 ~ 200 NTU: ≤ ± 6 %
Receiving element Silicon photocell
Light source Tungsten halogen lamp 6 V, 10 W
Measurement range 0.005 ~ 50.0 NTU 1 ~ 200 NTU 201 ~2000 NTU 2001~4000 NTU
Allowable error of indication ≤ ± 6 %
Receiving element Silicon photocell
Light source Tungsten halogen lamp 6 V, 10 W

Measurement Parameter COD (Chemical Oxygen Demand), TOC (Total Organic Carbon), UV275 (Ultraviolet Absorption Value), TDS (Total Dissolved Solids), Electrical conductivity, Temperature
COD Range 0-100 mg/L
TOC Range 0-100 mg/L
UV275 Range 0-1.0 au/cm
pH Range - 2.000 to 20.000 pH
pH Resolution 0.001, 0.01, 0.1 pH, selectable
pH Accuracy ± 0.002 pH
pH Calibration Points 1 to 5 points

Our Pocket TDS (Total Dissolved Solids) Meters are compact handheld devices designed for quick and convenient measurement of the concentration of dissolved solids in water. These meters typically use conductivity measurements to estimate TDS levels, providing users with valuable insights into water quality. With their portable design, digital displays, and straightforward operation, pocket TDS meters are widely used in applications such as water testing, aquarium maintenance, and hydroponics. They offer a practical and efficient way to assess the mineral content of water, ensuring its suitability for various purposes and providing essential information for maintaining optimal conditions in diverse environments.

TDS measuring range 0 ~ 2500 ppm
EC measuring range
Temperature range 0 °C ~ 50 °C
Resolution 2 ppm
TDS measuring range 0 ~ 9999 ppm
EC measuring range
Temperature range 0 °C ~ 50 °C
Resolution 10 ppm
TDS measuring range 0 ~ 5000 ppm
EC measuring range 0 ~ 999 µs/cm
Temperature range 0.1 °C ~ 80 °C
Resolution
WhatsApp
×

Get Quotation

Follow Us

Copyright © Labotronics Scientific 2025