Clean oven LB-20CLO
Clean oven LB-20CLO is facilitated with rapid heating and working temperature of 10 °C to 200 °C. Built-in fiberglass wool insulated layer prevents heat loss. Circulating fan motor hot air ensures uniform temperature distribution in a chamber. Humidifying system overheating protection prevents unit damage.
$ 9175
Download CatalogSpecifications
| Capacity | 270 L |
| Temperature range | RT 10 ℃ ~ 200 ℃ |
| Dust class | Class 100 / Class 1000 |
| Exterior dimensions ( W x H x D ) | 1100 x 1600 x 650 mm |
| Power supply | AC 3 phase 220 V |
| Interior dimensions ( W x H x D ) | 600 x 900 x 500 mm |
| Temperature fluctuation | ± 0.3 °C |
| Temperature uniformity | 1 °C |
| Load | 20 kg per shelf |
| Door | Single door Explosion-proof lock Silicone gaskets |
| Inner chamber material | SUS#304 |
| External chamber material | Cold-rolled plate with powder coated finishing |
| Insulation | Fiberglass wool |
| Controller | Temperature controller, digital set mode, digital display, PID auto calculation, SSR control, single segmentation control |
| Heater | Oval electrical heating ceramic tile Low radiation electrical heater |
| Air filter | HEPA filter |
| Wind cycling system | Motor with centrifugal fan for uniform wind |
| Air ventilation system | Adjustable air throttle, directly connected with air exhaust duct |
| Surrounding temperature range | 0 ℃ ~ 30 ℃ |
| Surrounding relative humidity | ≤ 85 % RH |
| Atmospheric pressure | 0.086 MPa ~ 0.106 MPa |
| Ambient air requirements | No high concentrations of dust, flammable and explosive gas, strong electromagnetic radiation source nearby |
| Prohibited items for the unit | Flammable explosive volatile material sample test or storage Corrosive substance sample test or store Biological sample test or store Strong electromagnetic emission source test or store |
Features
- Temperature controller
- Digital set mode and display
- PID controlled auto calculation
- Single segmentation control
- Solid state relay control ( SSR control )
- Low radiated oval electrical heating tile
- Adjustable air throttle ( directly connected to air exhaust duct )
- Overheating circuit-breaker, compressor and control system overload protection, humidifying system overheating protection, breakdown light indicator
- Optional appearance (Dual doors, dual layers, stainless steel shell, without viewing window)
Standard Accessories
| Accessory No | Accessory | Quantity |
| 1. | Electrical heater | 1 piece |
| 2. | Non fuse switch | 2 piece |
| 3. | 3 meter power cord | 1 piece |
| 4. | Tray stand | 2 piece |
| 5. | Timer | 1 piece |
