Environmental stress screening test chamber LB-18ESS

Environmental stress screening test chamber LB-18ESS

Environmental stress screening test chamber LB-18ESS is a 1000 L test chamber equipped with a wide range of temperatures ( -70 °C to 100 °C ). It comprises of a 3 level overheating protection device designed to meet comprehensive test conditions of temperature to test product defects and production flaws.

Buy Now Download Catalog

Specifications

Chamber capacity 1000 L
Temperature change rate 15 °C / min
Interior dimension ( W x H x D ) 1000 x 1000 x 1000 mm
Exterior dimensions ( W x H x D ) 1600 x 2200 x 2000 mm
Temperature range ( -70 °C to 100 °C )
Rapid temperature change ( -55 °C to 85 °C )
Control system Full linear control
Constant temperature ± 0.5 °C
Temperature deviation ± 3.0 °C
Compressor Semi-hermetic compressor
Cooling mode Water cooled
Cooling system Balanced Temperature & Humidity control system
Heater Iron-chrome wire heater
Blower Centrifugal blower
Temperature sensor Pt100 Platinum resistance thermometer sensor
Controller Touch screen programmable controller
Ambient temperature 11 °C to 35 °C
Power supply AC 380 V ± 10 % 50 Hz
Exterior material Cold-rolled steel sheet ( Rust proof & Plastic spray treated )/ Stainless steel
Interior material Stainless steel plate ( SUS 304 )
Insulation material Rigid polyurethane foam and glass wool
Observation window Glass incorporating heat generator
Weight 1800 kgs

Features

  • Wide temperature range ( -70 °C to 100 °C )
  • Standard refrigeration system ( semi-hermetic compressor )
  • Touch screen interface panel
  • 2 access cable ports
  • 3 level overheating protection device
  • High testing precision
  • Large observation window
  • Water and electricity separation design

Applications

Used to detect production flaws by military, aerospace industry and electronic manufacturers to determine environmental adaptability and service life of a product

Standard Safety Devices

Safety Device No. Safety Device
1 Compressor over pressure
2 Short circuit
3 Overload protection

Request Quotation

Environmental Stress Screening Test Chamber

Chamber capacity 1000 L
Temperature change rate 10 °C / min
Interior dimension ( W x H x D ) 1000 x 1000 x 1000 mm
Exterior dimensions ( W x H x D ) 1600 x 2200 x 2000 mm
Chamber capacity 225 L
Temperature change rate 10 °C / min
Interior dimension ( W x H x D ) 600 x 750 x 500 mm
Exterior dimensions ( W x H x D ) 1200 x 1950 x 1500 mm
Chamber capacity 408 L
Temperature change rate 10 °C / min
Interior dimension ( W x H x D ) 800 x 850 x 600 mm
Exterior dimensions ( W x H x D ) 1400 x 2050 x 1600 mm

Labotronics Pharmaceutical Stability Test Chambers are specialized enclosures designed to assess the stability and shelf life of drugs, vaccines, and other pharmaceutical products under controlled environmental conditions. These chambers replicate a range of temperature and humidity settings, enabling manufacturers to evaluate the impact of different storage conditions on the integrity and efficacy of medications over time. These chambers play a pivotal role in accelerating the testing process by exposing products to accelerated aging conditions, helping pharmaceutical companies make informed decisions about formulation, packaging, and storage recommendations.

Chamber capacity 200 L
Loading clapboard layers 3
No. of compressors ( Set ) 2
Interior dimension ( W x H x D ) 600 x 600 x 600 mm
Chamber capacity 500 L
Loading clapboard layers 6
No. of compressors ( Set ) 2
Interior dimension ( W x H x D ) 600 x 600 x 1300 mm
Chamber capacity 1000 L
Loading clapboard layers 5
No. of compressors ( Set ) 3
Interior dimension ( W x H x D ) 950 x 850 x 1200 mm
Chamber capacity 2000 L
Loading clapboard layers 7
No. of compressors ( Set ) 4
Interior dimension ( W x H x D ) 1200 x 1100 x 1500 mm

Our Temperature and Humidity Test Chamber operates within controlled temperature ranges for precise and reliable environmental testing. These chambers feature advanced shallow slot humidification systems and steam modes for accurate control. Their programmable touchscreen controller ensures easy management of environmental conditions. Labotronics test chambers ensure comprehensive testing in harsh conditions for electronics, automotive, and pharmaceutical industries.

Chamber capacity 150 L
Interior dimensions (W x H x D) 600 x 600 x 460 mm
Exterior dimensions (W x H x D) 880 x 1730 x 1400 mm
Temperature range ( -20 °C to 150 °C )
Chamber capacity 225 L
Interior dimensions (W x H x D) 700 x 700 x 480 mm
Exterior dimensions (W x H x D) 980 x 1890 x 1460 mm
Temperature range ( -20 °C to 150 °C )
Chamber capacity 408 L
Interior dimensions (W x H x D) 700 x 750 x 800 mm
Exterior dimensions (W x H x D) 980 x 1940 x 1740 mm
Temperature range ( -20 °C to 150 °C )
Chamber capacity 800 L
Interior dimensions (W x H x D) 1000 x 1000 x 800 mm
Exterior dimensions (W x H x D) 1280 x 2160 x 1750 mm
Temperature range ( -20 °C to 150 °C )

Our Altitude Test Chambers are specialized enclosures designed to simulate high-altitude conditions for testing the performance and durability of various products. These chambers control factors such as pressure, temperature, and humidity to replicate the low-pressure environments found at different altitudes. Widely used in aerospace, automotive, and electronics industries, altitude test chambers help assess how materials and components withstand reduced air pressure, ensuring the reliability and safety of products like aircraft, automotive systems, and electronic devices that may encounter high-altitude conditions during their lifecycle.

Chamber capacity 504 L
Interior dimensions ( W x H x D ) 700 x 900 x 800 mm
Exterior dimension ( W x H x D ) 1150 x 2300 x 1850 mm
Temperature range ( -70 °C to 150 °C )
Chamber capacity 1000 L
Interior dimensions ( W x H x D ) 1000 x 1000 x 1000 mm
Exterior dimension ( W x H x D ) 1450 x 2400 x 2050 mm
Temperature range ( -70 °C to 150 °C )
Chamber capacity 1500 L
Interior dimensions ( W x H x D ) 1000 x 1000 x 1500 mm
Exterior dimension ( W x H x D ) 1450 x 2400 x 2550 mm
Temperature range ( -70 °C to 150 °C )
Chamber capacity 2000 L
Interior dimensions ( W x H x D ) 1200 x 1200 x 140 mm
Exterior dimension ( W x H x D ) 1650 x 2600 x 2450 mm
Temperature range ( -70 °C to 150 °C )

Our Salt Spray Test Chambers operate within a controlled temperature range, providing accurate corrosion testing across various industries. They offer spacious capacities, ensuring effective and reliable salt fog testing. Their independent conical spray towers guarantee precise performance, while customizable spray quantities enable adaptable testing. They feature high-precision nozzles for uniform salt fog dispersion and accurate results. Labotronics salt spray test chambers are perfect for use in automotive, aerospace, marine, electronics industries, and research labs.

Capacity 270L
Temperature Range RT 5°C to 50°C
Saturated Barrel Temperature Range 47°C to 63°C
Temperature Uniformity ≤ ±2.0°C
Chamber capacity 60 L
Interior dimensions (W x H x D) 600 x 400 x 450 mm
Exterior dimensions (W x H x D) 1130 x 1070 x 630 mm
Temperature range 35 °C ± 1°C to 50 °C ± 1°C
Chamber capacity 800 L
Interior dimensions (W x H x D) 1600 x 500 x 1000 mm
Exterior dimensions (W x H x D) 2240 x 1500 x 1600 mm
Temperature range 35 °C ± 1°C to 50 °C ± 1°C
Capacity 108L
Temperature Range RT 5°C to 50°C
Saturated Barrel Temperature Range 47°C to 63°C
Temperature Uniformity ≤ ±2.0°C

Labotronics Plant Growth Test Chamber offers fully customizable environment. Ideal for modifying experiments to your specific needs. Stay in control with real-time monitoring and easy data analysis. Our chamber’s compact design maximizes lab space without sacrificing functionality. Intuitive interface simplifies experimentation for all skill levels. Our chamber ensures reliable results and promotes innovation in plant biology and agriculture.

Volume 450 L
Temperature Range 0℃ to 65℃ (Without illumination) 10℃ to 65℃ (With illumination)
Temperature Resolution Ratio 0.1℃
Temperature Motion ± 0.5℃
Volume 1135L
Temp. Range (Lights ON) +3℃ to +45℃
Temp. Range (Lights OFF) +3℃ to +45℃;(Optional: -10℃ to +45℃)
Temp. Precision 0.1℃

Our Temperature Test Chambers simulate controlled temperature conditions for precise environmental testing across various industries. They feature advanced air circulation and independent heating for consistent temperature distribution. Their safety mechanisms, including overheat protection and an audio signal alarm, ensure reliable operation. They feature digital displays for customizable settings and easy temperature monitoring. These are ideal for testing material durability and product reliability in the electronics, automotive, aerospace, and pharmaceutical industries.

Capacity 50L
Temperature Range 0 to +150°C
Temperature Fluctuation ≤ ±0.5°C
Temperature Uniformity ≤ 2.0°C
Capacity 50L
Temperature Range -20 to +150°C
Temperature Fluctuation ≤ ±0.5°C
Temperature Uniformity ≤ 2.0°C
Capacity 50L
Temperature Range -40 to +150°C
Temperature Fluctuation ≤ ±0.5°C
Temperature Uniformity ≤ 2.0°C
Capacity 50L
Temperature Range -70 to +150°C
Temperature Fluctuation ≤ ±0.5°C
Temperature Uniformity ≤ 2.0°C

Our Benchtop Temperature Test Chambers provide precise environmental testing by simulating extreme conditions for various laboratory applications. Their well-designed air circulation system ensures uniform temperature distribution. They feature an advanced heating system, ensuring stable and consistent performance. Their user-friendly touch screen interface enables intuitive operation with precise control. Labotronics test chambers are ideal for laboratories, research centers, electronics testing, aerospace, and automotive industries.

Capacity 12L
Temperature Range - 40 to +150°C
Temperature Fluctuation ≤ ± 0.5°C
Temperature Uniformity ≤ 1.5°C
Capacity 22L
Temperature Range -40 to +150°C
Temperature Fluctuation ≤ ± 0.5°C
Temperature Uniformity ≤ 1.5°C
Capacity 36L
Temperature Range -40 to +150°C
Temperature Fluctuation ≤ ±0.5°C
Temperature Uniformity ≤ 1.5°C
WhatsApp
×

Get Quotation

Copyright © Labotronics Scientific 2025