Point Tester
Our point tester is a device used to assess the electrical conductivity and integrity of specific points or connections in electrical circuits or components. It typically consists of a handheld instrument with probes that are touched to the points under evaluation. By applying a low-voltage current and measuring the resulting resistance or voltage drop, point testers help technicians identify faulty connections, breaks in conductors, or issues like corrosion, loose solder joints, or poor crimps. They are invaluable tools in troubleshooting and maintenance of electrical systems, as they quickly pinpoint problematic areas, aiding in the prevention of electrical failures, and ensuring the reliability and safety of electronic equipment and systems.
Aniline Point Tester
Auto-ignition Point Tester
Automatic Tag Closed Cup Flash Point Tester
Cleveland Open Cup Flash Point Tester
Dropping Point Tester
Equilibrium Closed-Cup Flash Point Tester
Freezing Point Tester
Gear Oil Channel point Tester
Melting Point Tester
Pensky-Martens Closed Cup Flash Point Tester
| Ignition method |
Automatic |
| Ignition gas |
Pipe gas or LPG |
| Test temperature |
-40 °C ~ 70 °C |
| Test sample volume |
50 mL |
| Temperature range |
RT ~ 800 °C |
| Temperature accuracy |
≤ 1 °C |
| Conical flask capacity |
200 mL |
| Generator turbine speed |
> 30 MW |
| Temperature range |
RT ~ 200 °C |
| Temperature accuracy |
≤ ± 0.5 °C |
| Heating power |
800 W |
| Motor power |
6 W |
| Ignition method |
Manual |
| Ignition gas |
Pipe gas or LPG
Pressure ≤ 10kPa |
| Measuring range |
90 °C ~ 400 °C |
| Flame |
Pilot flame |
| Temperature control range |
RT ~ 400 °C |
| Temperature control accuracy |
± 3 °C |
| Temperature control point |
232 °C
288 °C
343 °C |
| Power consumption |
800 W |
| Cold trough temperature range |
20 °C to -70 °C |
| Temperature accuracy |
± 0.5 °C |
| Cooling system |
Refrigeration compressor |
| Sample stirring |
0 beats/min ~ 120 beats/min |
| Melting temperature range |
50 ℃ ⁓ 270 ℃ |
| Oil bath cup |
250 ml beaker |
| Rate |
0.5, 1.0, 1.5, 3.0 ℃/min |
| Heater power |
2000 W |
| Heating temperature range |
RT ~ 90 °C |
| Cooling temperature range |
RT to -70 °C |
| Temperature accuracy |
± 0.1 °C |
| Control point temperature |
46 °C |
| Ignition method |
Manual |
| Ignition gas |
Pipe gas or LPG
Pressure ≤ 10 kPa |
| Measuring range |
40 °C ~ 300 °C |
| Flame |
Pilot flame |
| Ignition method |
Remote control |
| Ignition gas |
Pipe gas or LPG |
| Measuring range |
90 °C ~ 400 °C |
| Flame |
Pilot flame + glow plug |
| Glass bath capacity |
800 mL |
| Test hole |
2 |
| Stirring method |
Engine |
| Stirring speed |
500 rpm |
| Temperature range |
Ambient to -70 °C |
| Cooling bath capacity |
8 L |
| Accuracy |
± 0.1 °C |
| Cooling method |
Compound compression refrigerator |
| Ignition method |
Remote control |
| Ignition gas |
Pipe gas or LPG
Pressure ≤ 10 kPa |
| Measuring range |
40 °C ~ 300 °C |
| Flame |
Pilot flame |
| Ignition method |
Automatic |
| Measuring range |
90 °C ~ 400 °C |
| Flame |
Pilot flame + glow plug |
| Temperature sensor |
Glass pt100 |
| Ignition method |
Automatic |
| Flame |
Pilot flame |
| Temperature sensor |
Glass pt100 |
| Compliance |
ASTM D93 |
| Testing range |
RT ~ 400 °C |
| Ignition mode |
Automatic electronic |
| Temperature detection |
Precision platinum resistance |
| Repeatability |
± 2 °C |
| Detection mode |
Infrared scanning |
| Test hole |
4 |
| Alarm mode |
Audible and visual system |
| Display screen |
LCD (Touch screen) |
| Resolution |
RT ~ 350 °C |
| Flash point repeatability |
0.1 °C |
| Temperature Range |
-30 °C to 100 °C |
| Resolution |
± 0.1 °C |
| Ambient Temperature |
5 °C to 30 °C |
| Relative Humidity |
30 to 80 % |
Copyright © Labotronics Ltd. 2023
