Temperature Parameters

Measuring parameters

COD Measuring Range

Measurement Modes

Benchtop Multiparameter Meter LB-10BMM

Benchtop Multiparameter Meter LB-10BMM

    Temperature Parameters Range: -5 to 110 ºC, 23 to 230 ºF
    Unit: ºC, ºF
    Resolution: 0.1
    Accuracy: ±0.2
    Measurement Modes Reading Mode: Auto Read (Fast, Medium, Slow), Timed, Continuous
    Reading Prompts: Reading, Stable, Locked, Temp. Compensation: ATC, MTC
    Parameters pH/ EC/ ISE/ Temp. (mV/ ORP/ pX/ Resistivity/ TDS /Sal.)
    pH Range: -2.00 to 20.00 ph
    Resolution: 0.1, 0.01 pH
    Accuracy: ±0.01 pH
    Calibration Points: Up to 5
    Standard Recognition: NIST, GB, and DIN buffers
    Slope Limit
Benchtop Multiparameter Meter LB-11BMM

Benchtop Multiparameter Meter LB-11BMM

    Measuring parameters pH/EC/ISE/Temperature (mV/ORP/pX/Resistivity/TDS/Salinity)
    Measuring range pH: -2.000 to 20.000 pH
    mV/ORP: -2000.00 to 2000.00 mV
    pX range: -2.000 to 20.000 pX
    ISE: 1E-9 to 9.999E9
    Conductivity: 0.000 µS/cm to 2000 mS/cm
    Resistivity: 5.00 Ω·cm to 100.00 MΩ·cm
    TDS: 0.000 to 1000 ppt
    Salinity: 0.0 to 80.0 ppt
    Temperature: -10 to 135°C, 14 to 275°F
    Resolution pH: 0.1, 0.01, 0.001 pH
    mV/ORP: 0.1, 0.01 mV
    pX: 0.1, 0.01, 0.001 pX
    ISE: Up to 4 significant units
    Conductivity: 0.001 µS/cm
    Resistivity: 0.01 Ω·cm
    TDS: 0.001 ppm
    Salinity: 0.1 ppt
    Temperature: 0.1°C/°F
    Accuracy pH: ±0.002 pH
    mV/ORP: ±0.1 mV or ±0.03%
    pX: ±0.002 pX
    ISE: ±0.3%
    Conductivity: ±0.5%FS
    Resistivity: ±0.5% FS
    TDS: ±0.5%
    Salinity: ±1 ppt
    Temperature: ±0.1 °C/°F
Benchtop Multiparameter Meter LB-20BMM

Benchtop Multiparameter Meter LB-20BMM

    COD Measuring Range 10 to 15000 mg/L
    COD Detection Method Potassium Dichromate Method
    Potassium Permanganate method
    COD Detection Lower Limit 10 mg/L
    COD Digestion Temperature & Time 165 °C, 20 min

WhatsApp
×

Get Quotation

Copyright © Labotronics Scientific 2025